Dynaudio BM14S II High-end 12” Precision Subwoofer
40.000.000,00 ₫
🚚 Miễn phí giao hàng toàn quốc
SKU
BM14SMKII
Designed to compliment BM mkIII series monitors, the Dynaudio BM14S II active subwoofer adds extended bass in mid-sized mixing and recording environments.
The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors.
The BM14S II is a precision subwoofer specifically designed to complement BM6 mkIII, BM12 mkIII, BM6A and BM15A monitors, adding extended bass in mid-sized mixing and recording environments.
- 12" Subwoofer
- Handcrafted driver
- Selectable LFE or slave mode
- Made in Denmark
| System: | Precision Subwoofer |
|---|---|
| Frequency Response (±3dB): | 18Hz - 250Hz |
| Inputs: | LFE/Slave, SAT/SUB, XLR right/left full bandwidth |
| XLR Input impedance: | + branch 20 kOhm, – branch 10 kOhm |
| Sensitivity: | 75 mVRMS to 5 VRMS, adjustable |
| Max. Input voltage: | 10 VRMS |
| Outputs: | Slave, SAT/SUB, XLR right/left, High-pass filtered |
| XLR Output impedance: | 100 Ohm (each branch) |
| XLR Pin-out: | 1: 0 / 2: + / 3: – |
| Mode selector: | LFE, Slave (Phase and volume controls are bypassed in slave mode |
| Phase adjustment: | 0° - 180° |
|---|---|
| SAT High-pass: | Flat, 60Hz, 80Hz |
| SUB Low-pass: | 50Hz - 150Hz |
| Auto ON/OFF: | Automatic ON (LED green) when signal is detected at input Automatic mute (LED red) when no signal is detected for 15 to 20 min. |
| Amplifier power: | 300W, 4 Ohm |
| Power consumption: | <16W Standby, 325W Max. |
| Woofer: | 300 mm/12”, One piece molded MSP cone (Magnesium Silicate Polymer), 100 mm/4”, Pure aluminum voice coil |
| Weight: | 21kg. / 46.3lbs |
| Dimensions (W x H x L): | 350 x 350 x 369.5 / 13.8” x 13.8” x 14.5” |
Viết nhận xét của bạn
Customers Who Bought This Item Also Bought
Sản phẩm khác từ Dynaudio
