Universal Audio Apollo Twin USB Duo

21.500.000₫
VND USD

Universal Audio Apollo Twin USB is a USB 3.0 audio interface capable of capturing your audio in up to 24-bit/192 kHz with realtime, low-latency UAD plug-ins

Hết hàng


OVERVIEW

The Apollo Twin USB Desktop Interface with Realtime UAD Processing from Universal Audio is a USB 3.0 audio interface capable of capturing your audio in up to 24-bit/192 kHz with realtime, low-latency UAD plug-in processing. It features Universal Audio's Unison technology, which, in conjunction with their UAD plug-ins, is capable of emulating a range of tube and solid-state microphone preamps, including their impedance and gain-stage sweet spots.

The Apollo Twin USB includes the Realtime Analog Classics UAD plug-in bundle, featuring legacy editions of the LA-2A Classic Audio Leveler, the 1176LN Limiting Amplifier, and Pultec EQP-1A Program Equalizer, plus Softube Amp Room Essentials, and the 610-B Tube Preamp.

Record and Mix with 24-bit/192 kHz Sound Quality
The Apollo Twin gives you 24-bit/192 kHz sound and clarity. Its mic preamps, input stage, and audio conversion are identical to the Apollo series, translating into recordings with depth and punch. Digitally controlled analog monitor outputs provide full resolution audio (without digital scaling) at all listening levels - letting you create better mixes in real-world environments
A Complete Analog Studio with Realtime UAD Plug-In Processing
Imagine having access to a classic analog recording studio, right on your desktop. Apollo Twin lets you record and mix through the full range of UAD Powered plug-ins - including vintage EQs, compressors, reverbs, tape machines and more - at near-zero latency, regardless of your audio software buffer size. With UAD plug-ins from Ampex, Lexicon, Neve, Moog, Roland, SSL, Studer, and more, Apollo Twin can provide analog tone and warmth. 
The key is its onboard UAD-2 DUO DSP Processing, which powers the UAD plug-ins while reducing the strain on your host CPU. Apollo Twin includes the "Realtime Analog Classics" plug-in bundle, featuring a choice selection of vintage compressors, EQs and reverb, plus guitar amps and tube mic preamp emulation. From there, you can choose from a vast and expanding collection of plug-ins in the UA Online Store
Track Through Classic Mic Preamps Using Unison Technology
Unison technology allows Apollo Twin's mic preamps to sound and behave like the world's most sought-after tube and solid state preamps - including their all-important impedance, gain stage "sweet spots," and circuit behaviors. Based on integration between Apollo's digitally controlled analog mic preamps and its onboard UAD processing, Unison lets you track through colorful preamp emulations like the bundled UA 610-B Tube Preamp plug-in
I/O Connections
Apollo Twin is a 2-in/6-out interface with two mic/line preamps, two analog line outputs, two digitally controlled analog monitor outputs, and up to eight additional channels of digital inputs via Optical connection. Its conveniently located Hi-Z instrument input and headphone jack allow you to capture inspiration the moment it strikes
Console Application and Console Recall Plug-In
The Console application is Apollo Twin's software control interface. Its analog console-style design provides "realtime" tracking and monitoring with UAD Powered Plug-Ins - a feature not found in any other interface. Complete Apollo Twin Console setups can be saved as presets, or even saved within your sessions using the Console Recall plug-in. This enables hardware recall of all Apollo Twin settings, even months and years after you last opened your session
Key Features
  • Realtime UAD Processing for tracking through vintage compressors, EQs, tape machines, mic preamps, and guitar amp plug-ins with near-zero (sub-2ms) latency
  • Two mic/line preamps; two line outputs; front-panel Hi-Z instrument input and headphones output
  • Two digitally controlled analog monitor outputs for full resolution at all listening levels
  • Up to eight channels of additional digital input via Optical connection
  • Runs UAD Powered Plug-Ins via VST, RTAS and AAX64 in all major DAWs
Audio Interface
  • Sample rates up to 192 kHz at 24-bit word length
  • Up to 10 x 6 simultaneous input/output channels
  • Two balanced mic/line inputs
  • One Hi-Z instrument input
  • Digitally-controlled stereo monitor outputs
  • Stereo headphone outputs
  • Line outputs 3-4
  • Eight channels ADAT optical with S/MUX for high sample rates, or
  • Two channels S/PDIF optical with sample rate conversion
Monitoring
  • Digitally-controlled analog monitor outputs maintains highest fidelity
  • Independently-addressable stereo headphone outputs
  • Independently-addressable line outputs 3-4 can be used for additional cue mix
  • Front panel control of monitor levels and muting
UAD-2 Inside
  • Realtime UAD Processing on all analog and digital inputs
  • Same features and functionality as other UAD-2 devices when used with DAW
  • Includes UAD Powered Plug-Ins "Realtime Analog Classics" bundle
  • Complete UAD Powered Plug-Ins library is available online

 

System
I/O 2x Combo XLR/TRS mic/line inputs 
1x 1/4" (6.3 mm) Hi-Z input 
2x 1/4" (6.3 mm) TRS balanced line outputs (independent mix buses) 
2x 1/4" (6.3 mm) TRS balanced (one stereo pair, independent L/R mix buses) 
1x 1/4" (6.3 mm) TRS unbalanced stereo headphone output (independent L/R mix buses) 
1x TOSLINK optical, ADAT or S/PDIF selectable digital input 
1x USB 3.0 port
Conversion Supported Sample Rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz 
Bit-Depth per Sample: 24-bits 
Simultaneous A/D Conversion: 2 channels 
Simultaneous D/A Conversion: 6 channels 
Analog Round-Trip Latency: 1.1 ms @ 96 kHz 
Analog Round-Trip Latency with 4 Serial UAD Powered Plug-Ins via Console Application: 1.1 ms @ 96 kHz

 

Analog I/O
Line Inputs Line Inputs 1 & 2: 
Jack Type (combo mic/line balanced inputs): 1/4" (6.3 mm) female TRS balanced 
Dynamic Range: 117.5 dB, A-weighted 
Signal to Noise Ratio: 117.5 dB, A-weighted 
Total Harmonic Distortion + Noise: -108 dBFS 
CMRR: Greater than 60 dB (10' cable) 
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB 
Input Impedance: 10 kOhms 
Gain Range: +10 to +65 dB 
Maximum Input Level (@ Minimum Gain): 18 dBV 
Maximum Input Level (@ Maximum Gain): -37 dBV 
Stereo Level Balance: ±0.05 dB
Microphone Inputs Microphone Inputs 1 & 2: 
Jack Type (combo mic/line balanced inputs): Female XLR balanced (pin 2 positive) 
Phantom Power: +48 V, switchable per input 
Dynamic Range: 118 dB, A-weighted 
Signal to Noise Ratio: 118 dB, A-weighted 
Total Harmonic Distortion + Noise: -110 dBFS 
Equivalent Input Noise: -127 dB 
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB 
CMRR: Greater than 70 dB (10' cable) 
Default Input Impedance: 5.4 kOhms (variable via Unison preamp model) 
Gain Range: +10 to +65 dB 
Pad Attenuation: 20 dB (variable via Unison preamp model), switchable per input 
Maximum Input Level (@ Minimum Gain, with Pad): 23.8 dBV 
Maximum Input Level (@ Maximum Gain, with Pad): -31.2 dBV
Hi-Z Input Jack Type: 1/4" (6.3 mm) female TS unbalanced 
Dynamic Range: 117 dB, A-weighted 
Signal-to-Noise Ratio: 117 dB, A-weighted 
Total Harmonic Distortion + Noise: -101 dBFS 
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB 
Input Impedance: 1 MOhms 
Maximum Input Level (@ Minimum Gain): 10 dBV 
Maximum Input Level (@ Maximum Gain): -45 dBV
Line Outputs Line Outputs 3 & 4: 
Jack Type: 1/4" (6.3 mm) female TRS balanced 
Dynamic Range: 118 dB, A-weighted 
Signal-to-Noise Ratio: 118 dB, A-weighted 
Total Harmonic Distortion + Noise: -107 dBFS 
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB 
Stereo Level Balance: ±0.05 dB 
Channel Separation: Greater than 120 dB 
Output Impedance: 600 ohms 
Maximum Output Level: 18 dBV
Monitor Outputs Monitor Outputs 1 & 2: 
Jack Type: 1/4" (6.3 mm) female TRS balanced 
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB 
Dynamic Range: 115 dB, A-weighted 
Signal-to-Noise Ratio: 115 dB, A-weighted 
Total Harmonic Distortion + Noise: -105 dBFS 
Channel Separation: Greater than 118 dB 
Stereo Level Balance: ±0.05 dB 
Output Impedance: 600 ohms 
Output Gain Range: -96 to 0 dB 
Maximum Output Level: 18 dBV 
Operating Reference Level: +14 dBu, +20 dBu (selectable)
Headphone Output Stereo Headphone Output: 
Jack Type: 1/4" (6.3 mm) female TRS stereo, unbalanced 
Frequency Response: 20 Hz to 20 kHz, ±0.1 dB 
Dynamic Range: 113 dB, A-weighted 
Signal-to-Noise Ratio: 113 dB, A-weighted 
Channel Separation: Greater than 110 dB 
Total Harmonic Distortion + Noise: -101 dBFS 
Stereo Level Balance: ±0.11 dB 
Output Impedance: 10 ohms 
Output Gain Range: INF to 0 dB 
Maximum Output Power: 80 mW into 600 ohms

 

Digital Audio I/O
S/PDIF Connector Type: Optical TOSLINK JIS F05 (shared with ADAT) 
Format: IEC958 
Supported Sample Rates: 44.1, 48, 88.2, 96 kHz 
S/PDIF Input Channels: 2 (stereo L/R)
ADAT Connector Type: Optical TOSLINK JIS F05 (shared with S/PDIF) 
Format: ADAT Digital Lightpipe with S/MUX 
Supported Sample Rates: 44.1, 48, 88.2, 96, 172.4, 192 kHz 
ADAT Input Channels @ 44.1, 48 kHz: 1 to 8 
ADAT Input Channels @ 88.2, 96 kHz: 1 to 4 (S/MUX) 
ADAT Input Channels @ 176.4, 192 kHz: 1 to 2 (S/MUX_
Clock Sources Internal, S/PDIF, ADAT (digital clock sync source conditional per selected digital input type)

 

Electrical
Power Supply External AC to DC
Connector Type AC: Changeable blades (UL, VDE, UK, SSA, CCC) 
DC: Male plug, 2.1 mm x 5.5 mm, center positive
Power Requirements AC: 100~240 VAC, 50/60 Hz 
DC: 12 VDC, ±5%
Maximum Power Consumption 12 W

 

Environmental
Operating Temperature 32 to 95ºF (0 to 35ºC)
Storage Temperature -40 to 176ºF (-40 to 80ºC)
Operating Humidity 20 to 80%

 

System Requirements
System Requirements PC with available USB 3.0 port
Windows 7 or Windows 8.1, 64-bit edition
Intel Core i3, Core i5, Core i7, or Xeon processor
6 GB available disk space
Host software that supports VST, RTAS, or AAX 64 plug-in host formats
Internet connection to download software and authorize UAD plug-ins

 

General
Dimensions (W x H x D) 6.31 x 2.60 x 5.86" (160.2 x 66.0 x 148.8 mm) 
Depth, Chassis Only: 5.86" (148.8 mm) 
Depth, Including Knob & Jack Protrusions: 6.20" (157.5 mm)
Weight 2.35 lb (1.06 kg)

 

Packaging Info
Package Weight 4.35 lb
Box Dimensions (LxWxH) 7.9 x 7.8 x 5.5"
Sale

Không sẵn có

Hết hàng