Tascam US-1200 USB Audio Interface

3.500.000₫
VND USD

The Tascam US-1200 with DSP Mixer from Tascam features 4 of Tascam's HDDA XLR microphone preamps along with dual 1/4" line/instrument selectable inputs


"Sản phẩm Tascam US-1200 USB Audio Interface hiện không còn được sản xuất, hãy lựa chọn các sản phẩm thay thế"


OVERVIEW

Giving you access to 6 channels of recording at up to 24-bit/96 kHz resolution with an integrated DSP mixer, the US-1200 6-In/2-Out USB Audio Interface with DSP Mixer from Tascam features 4 of Tascam's HDDA XLR microphone preamps along with dual 1/4" line/instrument selectable inputs. The integrated DSP mixer gives you access to the interface's low latency mode, as well as its included DSP effects for monitoring. The mixer boasts 2 modes, one optimized for multi-track recording and the other geared towards live broadcast and video editing.

Equipped with HDDA Microphone Preamplifiers
The 4 XLR inputs are balanced microphone pre-amplifier circuits comprised of selected components optimizing sound quality. The US-1200 is designed to clearly translate expressive performances to a DAW
6 Analog inputs for Multi-Channel Recording
The US-1200 is loaded with 4 XLR connectors supplying +48V phantom power and 2 TRS balanced inputs. The balanced low-noise connections can be used for line connection equipment, e.g. keyboards, drums, etc. In addition, INPUTs 5 & 6 also support high-impedance connection for instrument (guitar/bass) recording
Low Latency Monitoring
Utilize the DSP Mixer for low-latency monitoring. Control the monitor balance easily with the MON MIX knob
Supports Recordings up to 24-bit/96 kHz
With increasing HDD capacity and ever-faster PCs, high-resolution formats are being used more frequently. Record at 24-bit/96 kHz resolution and guarantee your music reaches its highest potential
DSP Mixer
The built-in DSP mixer can be used for various purposes simply by switching modes:
Multi-Track Mode
Multi-track mode facilitates music production. The input sound and monitor mix can be adjusted separately, fine-tuning the balance between recording and playback volumes optimally. Monaural monitoring is also a possibility within the mixer operation
Stereo-Mix Mode
Stereo-mix mode can be used for internet streaming, live broadcasts or video editing. It is possible to deliver not only input sound but also sound from the PC back to the PC by mixing it inside the US-1200. Applications such as adding announcements while playing background music with the PC and then sending the accumulated track back to the PC
On-Board DSP Effects
The input effects can be selected from compressor or 3-band EQ. Input effects can use various recording. For example, while recording vocals you can boost your high-frequency range with the 3-band EQ. Also, the compressor effect is very convenient at recording especially for bass guitar, vocal and drums 
Reverb is available for your send effects.
Two TRS analog balanced outputs
50mW + 50mW headphone output
EIA 1U rackmount size

 

Sampling Frequency 44.1, 48, 88.2, 96 kHz
Bit Rate 16, 24-bit
Mic Input Mic In 1 to 4:
Connector: XLR-3-31 (1:ground, 2:hot, 3:cold), Balanced
Input Impedance: 2.2 kOhms
Rated Input Level, Gain Knob Max: -68 dBu (0.0003 Vrms)
Rated Input Level, Gain Knob Min: -22 dBu (0.0616 Vrms) 
Maximum Input Level: -6 dBu (0.3884 Vrms)
Headroom: 16 dB
Guitar Input Guitar In 5 and 6, when Guitar/Line switch is set to Guitar
Connector: 1/4" (6.3 mm) TS (T:hot, S:ground), Unbalanced
Input Impedance: 800 kOhms
Rated Input Level, Gain Knob Max: -51 dBV (0.0028 Vrms)
Rated Input Level, Gain Knob Min: -6 dBV (1.995 Vrms)
Maximum Input Level: +10 dBV (3.162 Vrms)
Headroom: 16 dB
Line Input Line In 5 and 6, when Guitar/Line In switch is set to Line In
Connector: 1/4" (6.3 mm) TRS jack (T:hot, R:cold, S:ground), Balanced
Input Impedance: 10 kOhms
Rated Input Level, Gain Knob Max: -41 dBu (0.0069 Vrms)
Rated Input Level, Gain Knob Min: +4 dBu (1.228 Vrms)
Maximum Input Level: +20 dBu (7.75 Vrms)
Headroom: 16 dB
Monitor Output Monitor Output L/R
Connector: 1/4" (6.3 mm) TRS jack (T:hot, R:cold, S:ground), Balanced
Output Impedance: 100 Ohms
Nominal Output Level: +4 dBu (1.273 Vrms)
Maximum Output Level: +24 dBu (12.283 Vrms)
Headphone Output Connector: 1/4" (6.3 mm) stereo phone jack
Maximum Output Level: 50 mW + 50 mW or higher (THD+N 1% or less, into 32 Ohms load)
USB Connector: USB B type, 4-pin
Format: USB 2.0 High Speed (480 mbps)
Power Dedicated AC adapter (GPE248-120200-Z)
Power Consumption 5.5 W
Operating Temperature 41 to 95°F (5 to 35°C)
Frequency Response 20 Hz to 20 kHz, +/-1 dB (44.1/48 kHz, JEITA)
20 Hz to 40 kHz, +/-2 dB (88.2/96 kHz, JEITA)
THD 0.01% or less (1 kHz sine wave, at maximum input, JEITA)
S/N Ratio 95 dB or higher (gain knob at MIN, JEITA)
Crosstalk 90 dB or more (1 kHz)
Windows Requirements OS: 
Windows XP: 32-bit SP3 or later
Windows 7: 32-bit, 64-bit
Windows 8: 32-bit, 64-bit
Windows 8.1: 32-bit, 64-bit

Compatible Computers: Windows computers with a USB 2.0 port
CPU: 2 GHz or faster dual core processor (x86)
Memory: 2 GB or more
Driver: ASIO 2.0, WDM (MME)
Mac Requirements OS: 10.6 to 10.9
Compatible Computers: Apple Macs with a USB 2.0 port 
CPU: 2 GHz or faster dual core processor
Memory: 2 GB or more
Driver: Core Audio
Dimensions (WxHxD) 19.0 x 1.8 x 11.8" (482.0 x 45.0 x 300.4 mm)
Weight 6.4 lb (2.9 kg)

 

Packaging Info
Package Weight 9.0 lb
Box Dimensions (LxWxH) 21.0 x 15.0 x 5.0"

 

Sale

Không sẵn có

Hết hàng