Furman PL-PROC 20A Power Conditioner
The Furman PL-PRO C is the latest generation of Furman's legendary 20 amp power conditioners, featuring Furman's exclusive Series Multi-Stage PROtection Plus (SMP+) with Linear Filtering Technology (LiFT) and Extreme Voltage Shutdown (EVS) for ultra-reliable protection of your gear.
The Furman PL-PRO C is the latest generation of Furman's legendary 20 amp power conditioners, featuring Furman's exclusive Series Multi-Stage PROtection Plus (SMP+) with Linear Filtering Technology (LiFT) and Extreme Voltage Shutdown (EVS) for ultra-reliable protection of your gear. The PL-PRO C also incorporates a USB port on the front panel to allow for the charging of MP3 players and other such devices that can be recharged via USB. Considering how affordable this level of protection is, you can't afford to not have a PL-PRO C.
SMP+ (Series Multi-Stage Protection Plus)
The Furman PL-PRO C's SMP+ surge suppression virtually eliminates service calls. Traditional surge suppression circuits "sacrifice" themselves when exposed to multiple transient voltage spikes, requiring the dismantling of your system, and repair of your surge suppressor. Not so with SMP+. With the PL-PRO C's SMP+, damaging transient voltages are safely absorbed, clamped and dissipated. No sacrificed parts, no service calls, no down time.
Extreme Voltage Shutdown (EVS)
Unique to the Furman PL-PRO C's SMP+ is its unparalleled clamping voltage (even when tested beyond the grueling specifications of - USA/CIDA's A-1-1 test). While other designs offer clamping voltages that are well above 300VAC peak, (far beyond long accepted professional standards), the Furman PL-PRO C's SMP+ clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! This unprecedented level of protection is only available with Furman's SMP+ technology. Additionally, Furman's trusted over-voltage circuitry protects against all too frequent accidental connections to 208 or 240VAC, by shutting off the PL-PRO C's incoming power until the over voltage condition is corrected.
LiFT (Linear Filtering Technology)
Unfortunately, traditional AC filter - Conditioners have been designed for unrealistic laboratory conditions. Prior technologies could actually harm audio and video performance more than they help, due to the resonant peaking of their antiquated, non-linear designs. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to re-boot digital pre-sets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. The Furman PL-PRO C's SMP+ with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground.
LED Rack Lights
The Furman PL-PRO C features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, the Furman PL- PRO D II includes a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck's operation.
USB for charging for external devices
Portable music players are becoming a staple on live sound gigs and the PL-PRO C includes a front-panel USB port for charging and powering of these devices
Furman PL-PRO C Features:
- Maximum Output Current: 20 amps
- Line Cord: Captive 3/12 AWG, 10 ft. black cord with NEMA 20 plug
- Pull-out Lights: Two multi-LED, dimmable lamps
- BNC Socket w/Switch: Rear rack lamp, 12VAC 500MA maxx (lamp not included)
- Operating Voltage: 90 to 139 VAC
- Spike Protection Mode: Line to neutral, zero ground leakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps
- Response Time: 1 nanosecond
- Maximum Surge Current: 6,500 Amps
- Noise Attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz, 50 dB @ 500 kHz
- Dimensions: 19" W x 10.5" D x 1.75" H
- Weight: 12 lbs.
- Power Consumption: 12 watts
- REquires ADP-1520 adapter for use in 15-amp situations (not included)
|Number of Outlets||9|
|Maximum Output Current||20A|
|Manufacturer Part Number||PL-PROC|