The Furman M-8Lx Merit X Series 8 Outlet Power Conditioner is a low-cost AC power solution for rack mount systems.
The Furman M-8Lx Merit X Series 8 Outlet Power Conditioner is a low-cost AC power solution for rack mount systems. Install an M-8Lx in the top slot of your rack, and the eight switched AC outlets in the rear panel will power up and protect all your equipment up to a 15A load. The M-8Lx also features an additional AC outlet on the front panel, and two pull-out light tubes for rack illumination, with dimmer control.
Merit X Series conditioners protect your delicate electronic equipment by combining high voltage varistor (MOV) surge and transient suppressors. The fast-acting suppression circuit quickly responds, and clamps transient voltages to safe levels. An RFI/EMI interference filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters, and similar sources of "electronic pollution" from contaminating the AC line, and from there leaking into sensitive audio, video, or computer circuits.
The M-8Lx features two slide out, swiveling light fixtures that provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.
|Input||1x 6' 14 AWG power cord with 3-prong plug|
|Output||8x rear panel 3-prong AC power outlets
1x Front panel 3-prong AC power outlet
|Surge Energy Rating||170 Joules|
|Noise Attenuation||Transverse mode: Greater than 26dB, 200 KHz to 10 MHz|
|Compatibility||19" Rack system|
|Agency Certifications||TUV, TUV-C|
|Dimensions||19 x 7.5 x 1.75" (48.3 x 19.0 x 4.5cm) WxDxH|
|Weight||5.5 lbs (2.5kg)|
|Package Weight||7.25 lb|
|Box Dimensions (LxWxH)||21.7 x 9.4 x 3.4"|