Focusrite Saffire PRO 26

8.290.000₫
VND USD

Saffire PRO 26 từ Focusrite là card thu âm Firewire, tương thích giao tiếp Thunderbolt, có 18 Input/8 Output, 4 Focusrite Preamp.


"Sản phẩm Focusrite Saffire PRO 26 hiện không còn được sản xuất, hãy lựa chọn các sản phẩm thay thế"


OVERVIEW

The Saffire PRO 26 from Focusrite is an 18 in/8 out Thunderbolt ready FireWire 400 audio interface. It is capable of capturing audio in up to 24-bit/96kHz resolution and features 4 Focusrite preamplifiers with selectable 48-volt phantom power on its rear panel. Additionally, the Saffire PRO 26 has 2 rear-panel 1/4" line inputs, and 2 front-panel instrument/line inputs, as well as ADAT optical and S/PDIF digital I/O connectivity options. 

The interface features a FireWire 400 port, and includes a FireWire 400 to 800 adapter cable. For portability, the Saffire Pro 26 can be powered via FireWire, so you can use it as a mobile recording rig. An optional FireWire to Thunderbolt adapter allows for Thunderbolt connectivity, albeit at FireWire 400 speed. To help you get started recording, Focusrite has included a downloadable software bundle with DAW, plug-ins, and virtual instruments. 

The Focusrite Red 2 and Red 3 Plug-In Suite (AAX, Audio Units, VST) delivers accurately modeled plug-ins based on the classic Focusrite Red 2 EQ and Red 3 Compressor hardware. The plug-ins allow for conveniently exploring the sound of the hardware originals from within Pro Tools (10 and above), along with other audio software. The software is a free download for new and current owners of the Saffire PRO 26. 

In addition to the Red 2 and Red 3 Plug-in Suite, the interface includes the Softube Time and Tone Pack. TSAR-1R adds space, depth and width to a sound. Change settings with a single slider, from realistic three-dimensional rooms to dramatic and dreamlike halls. Tube Delay is an echo effect that can go from clean to rude by overdriving its three modeled tube stages - delivers everything from realistic room echoes, to rockabilly style slap back, to dub reggae echo. Saturation Knob is a modeled output distortion unit adds grit and warmth - use it to fatten up bass lines, add some harmonics and shimmer to vocals, or simply destroy a drum loop.

Focusrite Preamps
Focusrite's preamp heritage lies at the heart of Saffire PRO 26, which includes four Focusrite designed preamps
24-bit/96 kHz Conversion
The Saffire Pro 26 features A-D / D-A conversion with JetPLL jitter reduction technology as well as reliable synchronization
Multiple Connectivity Options
Saffire PRO 26 will connect to multiple ports on your computer including FireWire and Thunderbolt ports. Saffire PRO 26 connects to a Thunderbolt port via a FireWire to Thunderbolt adaptor (not included) or directly to a FireWire 800 port with the provided cable
Keep Your USB Buses Free
If you're connecting multiple USB devices to your computer such as external hard drives, mice and keyboards, streaming audio over a separate FireWire port (or Thunderbolt with an optional adapter) will allow you to keep your USB ports free and reduce the possibility of interference with other devices
18 Inputs and 8 Outputs
A host of I/O options is provided, including four mic/line pres, two of which have high-impedance instrument capability and 8 dB pads, plus two additional TRS inputs; two independently-controlled headphone outputs, six TRS line outputs and a 'loopback' facility for routing audio between software applications via Saffire MixControl
Expandable Inputs with ADAT Optical
ADAT optical input allows extensive input expansion of your interface - expand Saffire PRO 26 with up to eight additional preamps or line inputs. Pair Saffire PRO 26 with Focusrite's OctoPre MkII eight-channel preamp and transform your interface into a 12 preamp unit
FireWire Bus Powered
Connect directly to your FireWire port for bus power - useful for live or mobile recording applications
Dual Headphone Outputs for Multiple Monitor Mixes
Give multiple artists independent, fully customized monitor mixes - two with independent headphone sockets and front-panel level controls
5-Segment LED Metering
Use the six front-panel LED meters to monitor input levels when recording
Portable Chassis
Saffire PRO 26 can sit neatly on your desktop, or will fit into a bag for mobile recording or live performance usage
Software Bundle
Included is a DAW in the form of Ableton Live Lite, Focusrite's Midnight and Scarlett plug-in suites, Novation BassStation virtual synthesizer and 1 GB of Loopmasters sample content
Softube Time and Tone Bundle
Contains TSAR-1R reverb, Tube Delay echo effect, and Saturation Knob, a modeled output distortion unit
I/O
Inputs 2x Front-panel 1/4" line/instrument inputs
2x Rear-panel XLR microphone inputs
2x Rear-panel combo XLR/TRS 1/4" microphone/line inputs
2x Rear-panel 1/4" line inputs
1x S/PDIF digital input
1x Optical ADAT digital input
1x 5-pin DIN MIDI input
1x Power supply input
Outputs 2x Front panel 1/4" headphone outputs
6x Rear panel 1/4" line outputs
1x S/PDIF digital output
1x 5-pin DIN MIDI output
Connection 1x FireWire 400 port
Preamplifier
Maximum Input Level Without Pad: +8.5 dBu, Balanced ≤ 1% THD
With Pad: +16.6 dBu, Balanced ≤ 1% THD
Bandwidth 20 Hz (minimum gain): -0.11 dB, roll-off when 0 dB @ 1 kHz
20 kHz (minimum gain): 0.02 dB, roll-off when 0 dB @ 1 kHz
20 Hz (maximum gain): -1.4 dB, roll-off when 0 dB @ 1 kHz
20 kHz (maximum gain): -0.45 dB, roll-off when 0 dB @ 1 kHz
THD + N Minimum Gain: < -98 dB, -1 dBFS input, 20 kHz bandwidth
Maximum Gain: < -81 dB, -1 dBFS input, 20 kHz bandwidth
EIN < -124 dBu, maximum gain, 150 ohm termination, CCIR-RMS weighting
dBFS Relative to dBu Minimum Gain: -8.2 dB
Maximum Gain: 41.9 dB
Gain Range 50 dB
CMRR @ 997 Hz:
Minimum Gain: < -54 dB
Maximum Gain: < -84 dB

@ 20 kHz:
Minimum Gain: < -45 dB
Maximum Gain: < -75 dB
Noise NiPoS:
Minimum Gain: < -106 dBu, 150 ohm termination, CCIR-RMS weighting
Maximum Gain: < -82 dBu, 150 ohm termination, CCIR-RMS weighting
Phantom Power Unloaded: 47.1 V
P48 Load: 13.7 V
Crosstalk 20 Hz: < -99 dB 
997 Hz: < -96 dB 
20 kHz: < -88 dB
Line Input
Maximum Input Level Variable Gain: > 28 dBu, Balanced, ≤ 1% THD
Fixed Gain: +10.7 dBu, Balanced, ≤ 1% THD
Bandwidth 20 Hz (minimum gain): -0.07 dB, roll-off when 0 dB @ 1 kHz 
20 kHz (minimum gain): 0.04 dB, roll-off when 0 dB @ 1 kHz 
20 Hz (fixed gain): -0.1 dB, roll-off when 0 dB @ 1 kHz 
20 kHz (fixed gain): 0.02 dB, roll-off when 0 dB @ 1 kHz 
20 Hz (maximum gain): -1.35 dB, roll-off when 0 dB @ 1 kHz 
20 kHz (maximum gain): -0.47 dB, roll-off when 0 dB @ 1 kHz
THD + N Minimum Gain: < -88 dB, -1 dBFS input, 20 kHz bandwidth 
Fixed Gain: < -99 dB, -1 dBFS input, 20 kHz bandwidth 
Maximum Gain 1&2: < -63 dB, -1 dBFS input, 20 kHz bandwidth 
Maximum Gain 3&4: < -73, -1 dBFS input, 20 kHz bandwidth
EIN 1&2: < -83 dBu, maximum gain, 50 ohm termination, CCIR-RMS weighting
3 to 6: < -94 dBu, maximum gain, 50 ohm termination, CCIR-RMS weighting
dBFS Relative to dBu Minimum Gain: -30.7 dB 
Fixed Gain: -10.4 dB
Maximum Gain: 19.5 dB
Gain Range 50.2 dB
CMRR 997 Hz:
Minimum Gain: < -50 dB 
Fixed Gain: < -56 dB
Maximum Gain: < -56 dB 

20 kHz:
Minimum Gain: < -44 dB
Fixed Gain: < -47 dB 
Maximum Gain: < -54 dB
Noise NiPoS:
Minimum Gain: < -105 dBu, 50 ohm termination, CCIR-RMS weighting
Fixed Gain: < -107 dB, 50 ohm termination, CCIR-RMS weighting
Maximum Gain 1&2: < -64 dBu, 50 ohm termination, CCIR-RMS weighting
Maximum Gain 3&4: < -75 dBu, 50 ohm termination, CCIR-RMS weighting
Instrument Inputs
Maximum Input Level Without Pad: +8.1 dBu, unbalanced ≤ 1 % THD
With Pad: +12.8 dBu, unbalanced ≤ 1 % THD
Bandwidth 20 Hz (minimum gain): -0.02 dB, roll-off when 0 dB @ 1 kHz
20 kHz (minimum gain): -0.01 dB, roll-off when 0 dB @ 1 kHz
20 Hz (maximum gain): -1.3 dB, roll-off when 0 dB @ 1 kHz
20 kHz (maximum gain): -0.48 dB, roll-off when 0 dB @ 1 kHz
THD + N Minimum Gain: < -92 dB, -1 dBFS input, 20 kHz bandwidth
Maximum Gain: < -59 dB, -1 dBFS input, 20 kHz bandwidth
EIN < -97 dBu, maximum gain, 600 ohm termination, CCIR-RMS weighting
dBFS Relative to dBu Minimum Gain: -7.8 dB 
Maximum Gain: 42.3 dB
Gain Range 50 dB
Noise Minimum Gain: < -105 dBu, 600 ohm termination, CCIR-RMS weighting
Maximum Gain: < -60 dBu, 600 ohm termination, CCIR-RMS weighting
Line Outputs
Maximum Output Level 15.9 dBu, 0 dBFS input level
Bandwidth 20 Hz: -0.08 dB, roll-off when 0 dB @ 1 kHz
20 kHz: -0.63 dB, roll-off when 0 dB @ 1 kHz
THD + N < -95 dB, - 1 dBFS input, 20 kHz bandwidth
Noise NiPoS: < -83 dBu, 50 ohm termination, CCIR-RMS weighting
Dynamic Range > 99 dB, 20 kHz bandwidth
Crosstalk 20 Hz: < -102 dB
997 Hz: < -101 dB
20 kHz: < -84 dB
Headphone Output
Maximum Output Level Unloaded: 13.7 dBu, 0 dBFS input signal
600 ohms: 13.6 dBu, 0 dBFS input signal
150 ohms: 13.2 dBu, 0 dBFS input signal
33 ohms: 10.2 dBu, 0 dBFS input signal
THD @ 0 dBFS:
Unloaded: < -47 dB, 20 kHz bandwidth
600 ohms: < -40 dB, 20 kHz bandwidth
150 ohms: < -31 dB, 20 kHz bandwidth
33 ohms: < -17 dB, 20 kHz bandwidth
Minimum Level Unloaded: 0.0 dBFS, ≤ 1% THD
600 ohms: 0.0 dBFS, ≤ 1% THD
150 ohms: -0.4 dBFS, ≤1 % THD
33 ohms: -3.0 dBFS, ≤1 % THD
Maximum Level Unloaded: 13.7 dBu, ≤1 % THD
600 ohms: 13.6 dBu, ≤1 % THD
150 ohms: 12.8 dBu, ≤1 % THD
33 ohms: 8.9 dBu, ≤1 % THD
Maximum Power 600 ohms: 13.6 dBm,≤1 % THD
18.8 ohms: 18.8 dBm, ≤1 % THD
33 ohms: 21.4 dBm, ≤1 % THD
Digital
Clock Accuracy 44.1 kHz: 4.5 ppm
48 kHz: 6.5 ppm
System Requirements
Windows CPU/Clock: 900 MHz or Pentium (1.5 GHz or higher recommended)
Memory (RAM): 512 MB (More recommended)
Screen Resolution: 1024x768 (1280x1024) or more recommended)
Mac CPU/Clock: Power PC G4/Dual 1 GHz or faster or any Intel-based Mac
Memory (RAM): 512 MB (More recommended)
Screen Resolution: 1024x768 (1280x1024) or more recommended)
Physical
Dimensions (WxDxH) 10.7 x 18.5 x 4.3" (273 x 470 x 108 mm)
Weight 6.8 lb (3 kg)

 

Packaging Info
Package Weight 6.8 lb
Box Dimensions (LxWxH) 18.425 x 10.866 x 4.173"

 

Sale

Không sẵn có

Hết hàng