Dynaudio M3XE Main Monitor System

880.000.000₫
VND USD

The Dynaudio M3XE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor


"Chúng tôi nghĩ rằng bạn đặc biệt, vì vậy chúng tôi sẽ order Dynaudio M3XE Main Monitor System cho bạn, và mang nó đến cho bạn nhanh nhất có thể"

OVERVIEW

The Dynaudio Professional M3XE monitor system that takes monitoring to a whole new level with a significant upgrade from its predecessor - the renowned M3A 3-way monitor. To top it off, the speakers are powered by two of Lab.gruppen's highly esteemed PLM10000Q amplifiers.

Sporting the newest and most pristine Dynaudio ESOTAR² driver technology, M3XE takes over where most other monitor systems give up. With unsurpassed attention to detail, underpinned by an impressive 22Hz - 21kHz frequency response and beyond 135dB SPL, M3XE leaves no room for desire in terms of resolution, range or sheer power.

Different from its sister monitor M3VE, a set of M3XE's is powered by not one, but two PLM10000Q Lab.gruppen amplifiers, using the integrated Lake active cross-over processing as well as powering the HF, MF and dual LF woofers by the four independent amplifier channels of the PLM10000Q.

The cutting-edge combination of Lab.gruppen and Lake processing technology forms the ultimate backing for M3XE and ensures unlimited power and the tools for optimizing any room to become the perfect listening environment.

In short, M3XE surpasses any and all main monitor expectations!

M3XE Monitor Features

  • Three-Way Main Monitor
  • Handcrafted drivers
  • For in-wall or free standing setups
  • Matched with Lab.gruppen PLM10000Q amplifiers
  • Made in Denmark
  • Unique linear phase frequency response
  • Frequency Response: 20Hz - 22kHz
  • Dual 12" ESOTAR Woofers, aluminum voice coil
  • Dual 6" Midrange drivers, MSP cone, 75mm aluminum voice coil
  • 1.1" (28mm) ESOTAR² Soft-dome tweeter, aluminum voice coil
  • Max. SPL (short term peak @ 1m): 133 SPL
  • Heavy internal damping for minimum cabinet resonance

Lab.gruppen PLM 10000Q 
The PLM 10000Q amplifier is based on technology from Lab.gruppen's highly acclaimed and road-proven FP+ series, but goes the extra mile for even greater sustained output power: an impressive 4 x 2,300 watts! Basically, the power amplifier technology is Lab.gruppen's patented Class TD amplifier design that offers the proven efficiency of Class D amplification with the amazing, sonic purity of Class B designs, but that is not all. A new circuit provides substantially greater current-carrying capabilities, and the Regulated Switch Mode Power Supply (R.SMPS) is optimized to deliver full power during long low-frequency bursts as well as maintain stable rail voltages despite fluctuating line voltage. Further, PLM 10000Q offers extreme power density, patented intercooler cooling, a full suite of protection features and a Power Average Limiter (PAL) that prevents tripping of mains breakers. Finally, advanced cross-overs inside the PLM 10000Q feed its four output stages, allowing for optimized RMS and true-peak limiter settings for the lo and mid/hi drivers. 

In other words, the PLM 10000Q amplifier delivers exactly the kind of pure and reliable power that is worthy of a set of high-end monitors such as Dynaudio Acoustic's M3A. 

Lab.gruppen PLM 10000Q main features

  • 2350 W per channel @ 2 ohms, 2300 W per channel @ 4 ohms, 1300 W per channel @ 8 ohms**
  • 2 unit 19" chassis weighing only 13.5 kg
  • Input connection: Analog, Digital, Dante
  • Class TD® output stage
  • Regulated Switch Mode Power Supply (R.SMPS™)
  • Copper-finned Intercooler® with transverse-mounted output devices
  • Full suite of protection and fault monitoring features
  • Digitally controlled 'amplifier gain' adjustable in 0.1 dB steps from 22 to 44 dB
  • Digital output attenuation in 0. 25 dB steps from -inf to 0 dB
  • Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL™) adjustable in 0.1 V steps from 17.8 to 153 V
  • Power Average Limiter (PAL)

**More power available when driven asymmetrically. 

Lake processing
Having the perfect monitors and amplifier is one thing. Making them deliver divine audio quality in any room is another - and this is where unique Lake processing makes all the difference. Lab-gruppen's PLM 10000Q amplifer holds two full-featured Lake Processor modules, each offering precise settings for gain, delay, crossover slope, equalization and limiting that provide you with unparalleled power to correct, shape and optimize your sound in any control room. 

Exclusive Lake Processing algorithms are included for Raised Cosine Equalization, linear phase crossovers, LimiterMax loudspeaker protection, and Iso-Float ground isolation. Raised Cosine Equalization is the foundation for the Lake Mesa EQ and the Ideal Graphic EQ, the two revolutionary EQ interfaces used by the Dolby Lake Processor. Mesa EQ offers asymmetric filtering to match the asymmetric responses of many loudspeaker systems while the Ideal Graphic EQ offers true sum-to-flat response, so the adjustments provide uniform boost and cut along with greater selectivity.

Lake processing main features

  • Raised Cosine Equalization
  • Linear phase and classical crossovers
  • LimiterMax - peak and RMS limiters
  • Iso-Float ground isolation
  • Super Module capability
  • Integration of third-party frequency measurement and analysis via Lake Analyzer Bridge

 

SPECS

M3XE

  • Model: M3XE
  • System: 3-way Active Main Monitor
  • Frequency Response (+/- 3 dB): 22 Hz - 21 kHz
  • Peak SPL 1m, pair (IEC Short Term): > 135 dB peak
  • Resonance Frequency: 24 Hz
  • Internal Cabinet Volume: 145 liters
  • Bass Principle: Bass reflex
  • Amplifier: 1 Lab-gruppen PLM10000Q (pr. speaker). Preset: M3XE V06
  • Tweeter: Esotar² 28 mm soft dome Magnetic fluid, Metal rear chamber, Pure alu wire voice coil, 4 mm die-cast alu front, Neodym magnet material
  • Midranges: 15 cm with 75 mm diameter pure alu wire voice coil, MSP-cone, long stroke
  • Woofers: Esotar 30 cm with 75 mm diameter pure cupper wire voice-coil, MSP-cone, long stroke
  • Weight: 65 kg
  • Dimensions (WxHxL): 555 x 775 x 505 mm
  • Cabinet: 25 mm MDF. Strategically braced and damped. Low turbulence reflex-ports. Separate chambers for each woofer.
  • Crossover: All 4 channels: Active dsp-based in-amp Lake processor. Each channel has impedance-correction providing the best working conditions for the ampflifier.

PLM 10000Q 

  • Model: PLM10000Q
  • Number of amplifier channels: 4
  • Peak total output all ch. driven: 10800 W
  • Pr. Channel (all ch. driven, 4 ohms): 2300 W
  • THD+N A-to-D @1kHz: <0.00033%
  • Internal Sample Rate: 96 kHz
  • Digital Input S-rates: 44.1, 48, 88.2, 96, 176.4, 192 kHz
  • Limiting: Digitally implemented, zero-overshoot Inter-Sample Voltage Peak Limiting (ISVPL) adjustable in 0.1 V steps from 17.8 to 153
  • Weight: 30 lbs / 13.5 kg
  • Dimensions (WxHxD): 483 mm (19”), 88 mm (2 U), Overall 470 mm (18.5”) deep including handles and rear support
Sale

Không sẵn có

Hết hàng